Print in Place Travel-Backgammon
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Print-in-Place Backgammon-Game for on the way, with pins instead of tokens and embedded magnets
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 542
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Backgammon-Board game is perfectly designed for travelling. On the outer parts are holes, so you can optionally embed two 20x6mm magnets inside of it. For this, just pause the print at layer 55.
The triangle needs to be printed 24 times as a whole, 12 times for each color you like. The pins need to be printed 15 times in two different colours.
Everything prints fine without support, I recommend enabling rafts for the pins though.
The dice-hole is designed to hold two 15.5mm dices neatly in place.
If you have any suggestions for improvement, please let me know!