HyperX Pulsefire Saga "Frostfire"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an remix of the "Pulsfire Saga" from HyperX.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 417
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hey,
this an Remix of the HyperX Pulsfire Saga.
I only changed the design. With the right design and the right colors, you can create some cool combinations. Unfortunately, I don't have a multi-material 3D printer to show this. In the pictures, I printed the mouse in black with orange accents.
I especially like the "Frostfire" design because it's a cool combination, but as I said, unfortunately, I can't print it like that. Perhaps someone could create a make of the model with this combination.
It was also important to me that the mouse with the design is really printable, which is why I have provided a short guide on how to print it and the settings below.
There are two important different Versions of the Mouse:
- The Mouse Body with Extrusions
- and the Mouse Body without Extrusions, but you can paint the outer layer in the Slicer (watch the Pictures)
Print Settings (from HyperX)
- Filament: PLA
- Walls: 2
- Top and Bottom Layers: 3
- Infill: 5%
- Infill Pattern: Adaptive Cubic
- Supports: Tree (In the pictures, you can see the critical areas where the 3D printer struggles to print the overhangs. I recommend painting support structures there)
I hope you like my Design :)