1 / 4
Subaru Forester CV Axle Seal Driver 4EAT 50mm/34mm FA25 DOHC — zdjęcie 1
1 / 4

Subaru Forester CV Axle Seal Driver 4EAT 50mm/34mm FA25 DOHC

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Drive those axle seals like boss! Timken 710739 and 710724 are the part numbers for American Subaru Forester FA25 DOHC

Ocena
0 / 5
Polubienia
4
Pobrania
36
Wydruki
0
Wyświetlenia
248
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Axle seal driver for a 2012 Subaru Forester. 4EAT Automatic transmission. Not sure if it would work on Manual but I assume due to the diff location. May also be compatible with the outback or other foresters (not 100% sure, check your seal dimensions when you buy them). It must be 34mm inner diameter, and 50-51mm outer diameter. 

Usage

NOTE: The driver side seal is DIFFERENT from the passenger side seal. You can see a photo of me using the tool. Press it in slightly with your hand so it seats a little, then start tapping on it with a long extension. I used my jack handle to tap the seal in with a rubber mallet. Worked perfectly! You can't get that view without removing the axle from the car and 2hrs of work! 
 

Rest assured - You can tap the tool in all the way and the and lip of the driver will catch the housing (not driving the seal any further!). Orient the seal SPRING SIDE IN!

This design is similar to Mountain Bike (MTB) fork seal drivers. Both seal types are rubber with hard metal seal bodies on the outer edges of the seal. Requiring a special driver to do the job right.

Printing

Added Orca Slicer file for A1 Mini - 5 walls, 25% infill, Fiberon PET-CF17 filament. PLA+ or Plus would probably be ok too. I was only planning on making this once, and making it right…

NOTES

If you like my work, and have seen the Elegoo Centauri Carbon, consider checking it out with my affiliate link below. I purchased one with my own money, but I appreciate the support so I can keep making/reverse engineering cool models. 

https://elegoo.sjv.io/LKyzRo

Alternatively if you're a bambu lab fanboi and love their stuff (like me), or need new parts ANYWAY for your bambu lab machine, consider using my affiliate link to help support me and my work on reverse engineering and crafting models. You can get 9% off currently with this link below!

https://us.store.bambulab.com/referral/3d-printer?ref=Q5CK92MYJOQO&skr=yes

Purchasing

If you don't have a 3D printer and would like to purchase this item, I would be happy to print and ship it to you. Send me a message at [email protected]. Located in USA but will ship globally if required. Shipping will vary and affect cost. 

Tagi