Protogen tail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Something that should make a good fit with a protogen helmet, made to be attached to a belt
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is like a furry tail that should do a perfect fit with a protogen helmet, or aurithron ? made a youtube video about it
the assembly should recquire plenty of M4 screws and Nylon bolts, varying from 25mm length to maybe 40-50 depending on how many links you decide to put side by side
The quick release system uses m5 nuts and bolts x1 and 2 m4x40 (with nuts) and was made to be attached to a belt
Important notice : this is a V1, that could be improved if needed, do not hesitate to tell me if you're having any issue printing/building or when using it.
Happy printing !
Video (it's in french)