parametric camshaft for picoMMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
parametric FreeCAD model of the picoMMU camshaft 4-lane version
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 229
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a slightly modified version of the camshaft since i had only smaller bearings at hand. The bearings are for the selector arm (opposite of the drive wheel) and are 7mm instead of the 8mm of the original design. With those smaller bearings the filament grip was not tight enough anymore.
The files here are for the version that should be functionally equivalent to the original.
I also uploaded a version for the 7mm bearings, that has a 9.27mm cam length (9.2mm is original).
This model was created and can be changed with FreeCAD realthunders branch (https://github.com/realthunder/FreeCAD/releases, Stable 2024.10.03)