Cineape 35 Dual Sma antenna + ELRS antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cineape35 dual SMA antenna mount + ELRS mount. Print in TPU, recommend supports
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 214
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to install a Walksnail Moonlight VTX onto my cineape35 using dual SMA antennas. The oem walksnail antennas are too short and routing for the antennas would require absurdly long ufl antennas. I also hate installing the ufl connectors into the moonlight kit so I swap all my quads to SMA.
The ELRS antenna mounting is a friction fit, it works great with my RM RP1 antenna insert the ufl from the top and guide inside with tweezers. push it, dont pull it or you risk pulling the ufl off the wire.
print with supports, oriented as it would be installed on the quad.
This was a 4 day exercise in frustration because I have been unable to find any stls for the cineape35 other than the 5 Stls on DarwinFPV's support page.
