Z-axis for TwoTrees TTS-10 laser engraver height adjustment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Manual Z-axis for focusing Two Trees TTS-10 laser engravers.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 167
- Wydruki
- 1
- Wyświetlenia
- 635
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Manual Z-axis for focusing Two Trees TTS-10 laser engraver, replacing original height adjustment mechanism.
Laser mounting plate with multiple offsets, for different laser builds. Mounts to laser module with 4 M3x12 screws.
Rails/baseplate mounts with 4x M3x12 mm screws onto the original laser carriage. I tapped the holes for M3, they're printed at 2.5 mm (M3 drill size). I also used some hot glue.
Assembly also requires 4x M3x20 mm screws and 4x M3 nuts.
You'll need two z endplate copies.
Printed mine on PETG with 0.2 mm layers, 20% infill, 3 walls, 3 floors and tops.