1 / 3
Walksail 1s kit and walksnail avatar HD nano v3 nano kit  & Caddyx polar vista kit camera protector — zdjęcie 1
1 / 3

Walksail 1s kit and walksnail avatar HD nano v3 nano kit & Caddyx polar vista kit camera protector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

It's a great protector if you need one. And trust me, you'd better have one.

Ocena
0 / 5
Polubienia
2
Pobrania
72
Wydruki
0
Wyświetlenia
334
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

 HD Camera Protectors for FPV — TPU Prints

These are excellent protectors to help shield your expensive HD FPV cameras during crashes.

1. Walksnail_1S_Lite_Camera_Protector (fully tested)

✅ Confirmed Fit:

Walksnail Avatar 1S Kit

Walksnail Avatar HD Nano V3 Camera
(Note: Not tested on the Lite Kit version, but it should fit — the camera is the same.)

2. Caddx_Polar_Vista_Kit_Protector (fitting tested, visibility needs confirmation)

✅ Confirmed Fit:

Caddx Polar Vista Camera
Note: Goggles view may need verification — feedback welcome!

 

Camera Feed Visibility

The protectors were designed to stay out of view in the FPV feed.

On the Walksnail Avatar Nano cameras, the protector sits low enough that it does not appear in the camera feed.

On the Caddx Polar Vista, the fit is good, but visibility in the goggles still needs testing — especially if your camera tilt is low or the frame has tight clearance.

If needed, you can trim or cut the bottom slightly to avoid any potential view obstruction on both models.

 

Recommended Print Settings

Material: TPU

Infill: 100%

Layer Height: 0.2 mm

Supports: Not required

Build Plate Adhesion: Brim (I recommend)