1 / 3
Winch cable pulley for 3D Sets cars
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Winch cable pulley for 3D Sets cars
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 97
- Wydruki
- 2
- Wyświetlenia
- 328
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (43)Powiązane
hardware needed: 2x M2x8mm screw, 2x M2 nut and cut metal steel 2mm rod as axle, 8mm length (or use parts with screw suffix and use another M2x8mm screw and nut instead of axle). Print pulley at 0.1 layer with support. Rest can be 0.2.