1 / 1
Alpakka Controller touch hexagon mask
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on mask for touch-sensitive hexagon to limit the conductive area.
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Alpakka Controller project: https://inputlabs.io/
Reference case design: https://github.com/inputlabs/alpakka_case
Snap-on mask for touch hexagon of Alpakka Controller. When this mask is attached it allows to limit the touch-sensitive surface in games when the more precise control over gyro on/off mode is needed. This modification is similar in its purpose to screw mod, but allows to quickly bring back the full surface when mask is removed.
Printing instructions:
- 0.15mm layer height, 0.2-0.24 first layer height.
- Very slow first layer, as the surface is a single layer only.
- Let the table to cool off completely, otherwise it will warp upon removal.
There are several STL files for different hole sizes.