Bath Plug (and silicone mould)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3D printable bath plug and a silicone mould for the same.
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 3
- Wyświetlenia
- 505
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This project was enabled by the recent “ironing” release in PrusaSlicer, allowing the 3D printing of a bath plug that actually prevents draining. I recommend either printing this solid or with a thick shell to prevent it absorbing water with use. This print does not require a flexible filament if the ironing function is smooth enough.
I have also included a 3D printable silicone mould for this plug for a much more satisfying and professional feeling plug. With your favourite silicone resin, you just need to mix ~16.5 mL of resin for this “open top” mould. Once it is cured you just need to remove some small amount of flashing around the parting line.