8BitDo Ultimate C or 2C Controller Charging Dock (mount on HSW with extra bracket)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dock with opening for USB-C charging cable, can be mounted to HSW with additional bracket.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 1117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
Designed to ensure smooth docking and undocking of the controller. I use this mounted to HSW so if used standalone you may need to adjust the model. The insert part was made separate for fine-tuning during development of the model, however you can print the combined model instead. If using USB-C cable then additional cable cover is required for the bottom.
Print settings:
- 0.3mm layer height
- 3 perimeters
- supports under the USB-C hole as per the screenshot
Assembly:
- Cable cover: M2x6 plastic screws
- HSW bracket: M3x8 plastic screws
Note:
1) Undocking may require more force due to USB-C charging cable.
2) Example HSW brackets are included, however if specific placement is required then it may be best to design your own.
3) Model may need adjusting based on the USB-C cable to be used. USB-C cable I used: https://jp.daisonet.com/products/4562380817112?_pos=3&_sid=3c68ab3b6&_ss=r . Check screenshots and assembly file for dimensions.