Manscaped Lawnmower 2.0 Guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desperate times call for desperate measures. 3D printable guard for Lawnmower 2.0, not guaranteed fit for other models.
- Ocena
- 4 / 5
- Polubienia
- 12
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 1029
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution
Works better than you would think. Print first layer super slow, maybe add a bit of a glue stick swipe across. DO NOT PRINT WITH BRIM. The brim will interfere with the teeth, it will be impossible to remove the brim. I've included a photo to show the difference of no brim vs brim. The gaps will be too small to cut between. If you can print in two materials, highly recommend to do so with PETG and PLA to use one as supports and the other for the main part. I recommend printing the part with the flat backside of the teeth lined up to the bed for the smoothest glide along your body.