1 / 4
Prusa MK2 and MK2.5 holder for Raspberry Pi 1b enclosure — zdjęcie 1
1 / 4

Prusa MK2 and MK2.5 holder for Raspberry Pi 1b enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Prusa MK2 and MK2 holder for Raspberry Pi 1b enclosure

Ocena
0 / 5
Polubienia
1
Pobrania
8
Wydruki
0
Wyświetlenia
58
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I purchased an older Prusa i3 MK2.5 and wanted to operate it on my network. An old Raspberry Pi 1b and Wifi USB-dongle was lying around, so I gave it a try and tested to install Prusa Link on it, runs perfect. https://github.com/prusa3d/Prusa-Link/releases

It needs a long time to boot on the old RPI 1b, but with the small footprint of power consumption I simply let it run 24/7.

 

First issue was to find a case for the Raspberry Pi 1b with its 2 assembling holes, most cases are made for later models. 

User hofftari designed cases for several models, between these 10 models I found base and lid for the RPI 1b https://www.thingiverse.com/thing:1325370

 

The problem was to assemble the case to the printer frame, too wide so necessary to turn it. 

I created a holder with main focus to locate the case to the top of the frame and move it outwards to have more space for the extruder cable harness and the USB cable. 

 

Printed in PLA+ with 40% infill, possible less infill works as well

 

Tagi