Xiaomi Electric Scooter Bottle Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple Bottle Holder for 40mm Xiaomi Electric Scooter Shaft
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 258
- Wydruki
- 0
- Wyświetlenia
- 1034
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
3D-Printed Bottle Holder for Xiaomi Electric Scooter (40 mm Clamp Diameter)
This custom-designed bottle holder is specifically made for Xiaomi Electric Scooters and securely clamps onto the scooter’s stem with a 40 mm diameter.
It is perfectly sized to hold standard 500 ml bottles such as Coca-Cola, Sprite, Fanta, and similar soft drink bottles.
Assembly Instructions:
1. Remove the 4 screws securing the handlebar.
2. Carefully unplug the connector leading to the display.
3. Slide the clamp sleeve of the bottle holder onto the scooter shaft.
4. Reassemble everything in reverse order.
Features:
- Compatible with Xiaomi Electric Scooters (40 mm stem diameter)
- Securely holds 500 ml bottles (e.g. Coca-Cola, Sprite, Fanta, etc.)
- Durable and heat-resistant construction using ABS/ASA plastic
- Easy installation with a clamp design using two M3 screws and Nuts
- Compact shape that avoids interference with scooter controls Printing
Recommendations:
- Material: ABS/ASA
- Wall lines: Minimum 3
- Infill: 20%
- Supports: Enabled under the clamp sleeve •
- Fasteners: 2x M3 screws and Nuts required for mounting