Flexi cute hippo - Hippito
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Our first little hippo is here, print-in-place (no supports needed)! Commercial license - https://patreon.com/stlkrew
- Ocena
- 2 / 5
- Polubienia
- 40
- Pobrania
- 240
- Wydruki
- 0
- Wyświetlenia
- 592
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Animals
- Licencja
- Standard Digital File License
Hippito is a cute, print-in-place articulated hippo designed for smooth movement and no supports.
🚫 Please Note:
This STL is for personal use only. You may not sell printed versions or distribute the file.
If you'd like to sell prints, please subscribe to our Patreon for a commercial license:
👉 https://patreon.com/stlkrew/
🖨 Print Profile
Layer Height: 0.08 - 0.2 mm (tested on 0.2 mm, but 0.16 mm or lower is recommended for best detail)
Infill: 15% Gyroid
Wall loops: 2
Supports: None required
Scale: You can scale up freely. For smaller prints, keep scaling proportional and try lowering the Z height gradually—I tested it at 20mm Z scale and the joints still worked great!