Resistance Crossbow (Lamp) from Half Life 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crossbow from HL2. The rebar bolt lights up with an LED Strip inside clear PETG print.
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 855
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Most parts are printed or made from steel. Some parts are purchased like the scope and battery.
The prints are PLA by default. All parts are printed with a 0,6mm nozzle. The limbs need a 250x250 build plate, all other parts fit on smaller printers.
Rebar Bolt Light
The rebar bolt is PETG to allow the LEDs to shine through. The sections are 200mm tall and superglued together. Offsetting the internal S shaped part with the outer shell provide strentgh and alignment.
Limbs are ABS to allow them to bend a bit more. A few parts are TPU to alllow them to flex, which makes assembly easier.
Metal Parts
Some steel parts are welded and all of them cut with an angle grinder. Nothing super fancy, but printing them wouldnt look right/be strong enough.
Main body is 60x60mm steel tube
Screws have their coating removed and rusted with acidic vinegar.
Scope
Scope is a cheap one from aliexpress. You can find these for 20-30€
