Thermoelectric Cooler Test Stand (Peltier-effect)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A test stand for a 40 mm x 40 mm Peltier-effect thermoelectric cooler.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 444
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This test stand is designed to hold a 40 mm x 40 mm thermoelectric cooler that uses the Peltier-effect. The photos show an attached CPU heat sink and fan to dissipate heat away from the hot-side of the cooler for cooling efficiency. A thermometer is placed in the chamber underneath the test stand directly on the plate to measure the temperature on the cold-side of the cooler (bottom in test stand). Reaches 59 degF from ambient of approximately 78 degF.
This model was printed in PLA since it could withstand the temperature range induced by the cooling / heat dissipation of this device.
Check out the YouTube videos here:
A voiceover version:
Enjoy!