1 / 4
GBO die shell Re-forming Re-calibrator 9mm tube and dies adapter V2.0 — zdjęcie 1
1 / 4

GBO die shell Re-forming Re-calibrator 9mm tube and dies adapter V2.0

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the redesigned and revised version of the adapter for the GBO 9mm drawing die to release the cases into an…

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
30
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is the redesigned and revised version of the adapter for the GBO 9mm drawing die to release the cases into an external basket.

The bodies are now divided, to be able to intervene quickly in case of blockage, and the whole is locked by a key.


Questa e' la versione ridisegnata e rivista dell'adattore per il Dies trafilatore della GBO per 9mm per far uscire i bossoli in un cestello esternno.

Ora i corpi sono divisi, per poter intervenire velocemente in caso di blocco, e il tutto e' bloccato da una chiave.

Print Settings

Printer Brand:

Creality

Printer:

K1

**Supports:**

Yes

Resolution:

0.20

**Infill:**

15%


Notes:

The supports are only used for the die holder, no supports are needed for the tube and the key, for the tube only the supports for the base are needed

Category: Sport & Outdoors

Tagi