BLANK Apache Hardcase Tag Snug-Fit (3800/4800)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An improved snug-fitting DIY tag for your Harbor Freight Apache Hardcase
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 201
- Wydruki
- 5
- Wyświetlenia
- 581
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I noticed all the existing models for this have the incorrect bevel angle. This model ensures a snug fit, but not overly so.
Please enjoy and share feedback~
Included models
-A plate blank
-An ‘Emergency’ plate
Print resolution
Doesn't really matter. Any layer lines on the bevel will be hidden by the case slot. Pictured is 0.4mm @ .2mm layer height. Of course, anything you add to the tag with complex geometry may benefit from higher resolutions.
Notes
This may work with other hardcase models. Only tested with the 3800/4800. Please chime in if you've tried with another model!