1 / 7
1/4 Inch or 6.35mm drill bit holder for French Cleat
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for any 1/4 Inch or 6.35mm bits designed for French Cleat
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Description
A little holder for ¼ Inch or 6.35mm bits for a French Cleat wall. In this particular example, the holder is used for self-centering drill bits. It's available for three or five bits. It is not suitable for small straight bits. The upper part of the bit should be thicker in diameter than the bit itself.
Printing
PLA or PETG should work without any problem. No special requirements or supports necessary.