1 / 1
FF5M HotEnd - Bowden Tube Mount with PC4-M10 Connector — zdjęcie 1

FF5M HotEnd - Bowden Tube Mount with PC4-M10 Connector

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Needed a way to secure the bowden tube to my FlashForge 5M to work with my Infinety Flow.

Ocena
0 / 5
Polubienia
1
Pobrania
18
Wydruki
0
Wyświetlenia
137
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I bought the Infinity Flow https://infinityflow3d.com/ when it was on Kickstarter and LOVE it… but because it force feeds the filament into the hot end, I needed a way to secure the bowden tube from popping off. 

 

So I designed this simple mount that uses a PC4-M10 connector that all screws down into place.

I designed it so it still has room for the drag chain to be connected.

Used some M3 screws to hold it in place.  

I printed it in PETG,  flat side down, 100% infill, and with no supports.

Tagi