1 / 2
FF5M HotEnd - Bowden Tube Mount with PC4-M10 Connector with built in cutter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I improved upon my bowden tube mount for the FF5M by adding an inline filament cutter.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The in-line cutter and modified my existing boat tube, hot and connector for my FlashForge5M.
I printed it in PETG with 100% infill.
One part needed supports, but you can easily superglue it to the other part to make one solid unit. You then add the blade and the bolts as the original cutter design outlines.
