Sinclair A-bike seat stay hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement part for the Sinclair A-Bike. Joint that connects the rear upper tube and seat stay.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
A replacement part for the Sinclair A-Bike.
Joint that connects the rear upper tube and seat stay. See reference picture.
Designed a little stronger than the original one.
Print in the default position with supports everywhere. Only this orientation gives the strength in the right direction.
Supports can be pain to remove. Prepare the oval hole with a rotary tool if needed.
Building it in is a little tricky.
Unscrew two screws on the rear side. Unscrew the axis (which looks like two screws but is not) on the front side. Unscrew the rear brake to be able to pull the cable, until the connector is outside. Unscrew the top half of the cable from the connector, and the part is free.