Universal Cable Holder (for a velcro) for attachment to magnetic surfaces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
remix, added housing for magnets (20x20x5-M5, 30x20x5-M5, or 40x20x5-M5), max. width of velcro: 15mm.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 1
- Wyświetlenia
- 203
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
For the attachment to magnetic surfaces I added a housing for rectangular magnets. I used N35-type of size 30x20x5mm with a single M5 hole, it fits several sizes of rectangular magnets (tested with 20x20x5-M5, 30x20x5-M5, 40x20x5-M5). Note: there is a big tolerance of the magnets sizes. For example, the 30x20x5 size I got was 28x18x4. The sizing of the M5-hole was according to ISO10642 (well, more or less…).
For easy handling I added some extra grip on the sides of the model.
For mounting the magnets to the 3D-model I used :
- 1x M3x4 Flat Head Screw
- 1x M3x4 Joint Sleeve Nut
- 1x M4 (!) washer DIN125
Printed with PET-G on smaller side with support and brim. For printing multiple items at once I recommend “Print sequence”: “by Object”.