50mm gridfinity frame connection clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A slighty wider connector for connectable 50mm gridfinity frame generated at https://gridfinitygenerator.com/en/connect.
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 661
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
A modified version of https://gridfinitygenerator.com/en/connection-clip for 50 mm gridfinity. I increased the inner width of the part because of how tightly fitting it was (up to a point that one of the original clips I printed even broke when trying to use it). This one is still pretty tight (I used around 30 of them on my grid and all are pretty tight) but are easier to mount on the frame.
I used a flat end on screwdriver grip to push the clips in place, starting from snapping one end of the clip and continuing lengthwise. I applied a pressure from both “slopes” of the clip in order for it to clip in place.