1 / 2
Craftsman Brad Nailer Rear Valve Replacement — zdjęcie 1
1 / 2

Craftsman Brad Nailer Rear Valve Replacement

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Close replica of the rear valve part for the model 351.184090 brad nailer

Ocena
0 / 5
Polubienia
1
Pobrania
23
Wydruki
0
Wyświetlenia
54
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

Close replica of the rear valve part for the model 351.184090 brad nailer.

The rear seal leaks partially but doesn't seem to affect much. I can't get the rapid fire setting to work well (never has) but single shot works great with this replacement part.

I originally printed in TPU since the original part was stuff rubber, but the TPU I had was too flexible and allowed the o-ring to become dislodged. I made some small dimensional tweaks and tried PETG which worked much better. As such, I recommend PETG.

This was originally made for a Craftsman model 351.184090, but check the technical drawing for dimensions to see if it may work with your specific brad nailer.

Tagi