Thermalright AXP90-X53 Fan Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows for a thicker fan to be mounted to this slim cooler.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 142
- Wydruki
- 0
- Wyświetlenia
- 1065
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
If you've misplaced the original metal fan clips, or if you want to mount a thicker fan, this bracket is for you. First, attach your fan of choice to the bracket with typical PC fan screws, and then the bracket clips to the cooler in the same spot as the original brackets. This was designed for the aluminum version of the Thermalright AXP90-X53, but it may work with the blackout/copper versions as well.
I printed this out of ABS, as you can tell by the dust buildup it's been in service for over a year now and has held up perfectly to the heat inside the case. I think PETG would be fine as well, PLA might be pushing your luck but if you try it with long term success let everyone know in the comments.