Rubber Stamp - Paper Recycling Symbol
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remind people to recycle with this handy stamp ♻
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 88
- Wydruki
- 1
- Wyświetlenia
- 1254
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Introduction
Paper has excellent recyclability, if its recycled, that is. Add this logo to paper products to encourage recycling.
The recycling symbol is a slightly modified version of the 22 PAP logo by Anton Poliako, which is built around the standard recycling codes.
Printing
Print the stamp face down without supports. Use a flexible material like 90a TPU.
The best print surface is the satin sheet. Alternatively, use the smooth sheet with glue stick.
Its best sliced with an infill that has good compressibility in the z-axis such as gyroid, cubic, or adaptive cubic.
The handle needs to be printed in a non-flexible plastic like PLA or PETG. If your printer is decent at bridging this can be printed without supports too.
Assembly
Glue the rubber stamp into the cutout in the plastic handle. I found super glue to work fine.
Use
You'll need an inkpad that's at least 1.5"x 2" (4cm x 5cm). To get the best result while stamping, press the stamp down with firm pressure for 2 seconds.
Thats it, happy stamping!
♻