1 / 2
Handle with finger recesses for rear screw connection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle with finger recesses 2 variants - one for threaded screw-in sleeves and the other for M8 nuts
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 94
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (19)Powiązane
The handles are easy to print. If they are placed lying sideways on the printing bed, only support geometries in the holes may be required.
In one variant, threaded screw-in sleeves can be screwed in. I myself used Rampa muffles type SKD30 / SKD330 M8 and heated them with the hot air dryer before screwing in.
In the second variant, M8 nuts can be inserted.
My print settings: min. 2 outer lines, 25% infill, material PLA, PETG, ASA ...