Dummy 13 Overwatch Mercy staff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
articulated Mercy staff
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 310
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Overwatch Mercy staff for the Dummy 13!
If you drill a very small hole in the top cap you can use blue filament or yellow filament as the beam (see pictures)
For ease of printing, I have uploaded the files so that the parts will be in the correct orientation for printing.
I recommend gluing the top cap to the staff, but not the bottom cap or you wont be able to slide the staff into the hands.
This prints great at normal scale and 200% scale
Layer Height: .16
Infill: 20%
Infill Pattern: Rectilinear
Supports: no
Raft: no
Brim: Outer Brim only (on smaller parts if needed)
I've also made Mercy's Wings & Mercy's head for the Dummy 13:
Wings: https://www.printables.com/model/1408602-dummy-13-overwatch-mercys-wings
Head: https://www.printables.com/model/1408606-dummy-13-overwatch-mercys-head