Platform Bird Feeder - 1 Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Platform style birdfeeder that birds absolutely love to use!
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 122
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Easy print and makes a great gift for a bird lover.
In my yard, the platform style bird feeder is the most popular feeder and gets the most visits by far. I have to refill it every day. My old wooden one needs to be replaced, so I decided to design a 3D printed version. Print one for yourself and your birds will be happy!
The model prints in one piece and has painted brims to help with adhesion. The screen has 3mm holes and should be fine for general bird seed mixes.
I used 5 or 6 feet (2 Meters) of “#36 Mason Nylon String Line” to hang my feeder. The knots are very easy and the knot used is an “Anchor Bend” or “Fisherman's Hitch”. It is easy even to tie with synthetic string. I ended up attaching it to the pole with two loops left over from my 3 Part Hanger. For a platform bird feeder that you can print using the A1 Mini, check out my Platform Bird Feeder for A1 Mini.
If you print this platform feeder, please post a picture of birds feeding at the feeder!
Recommended Print Settings:
- .20mm Layer Height
- 3 Walls
- 15% Infill
- Set Infill Direction to 90 Degrees to speed up print