Mini Neo Geo AES Cartridge Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A miniature case for my mini Neo Geo cartridges
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 220
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Share Alike
First I made a mini Neo Geo AES Raspberry Pi 5 case. Then I made miniature cartridges for it. Finally, I wanted to have a place to store the fake mini-carts, so I made a box for them.
The lid might need to be extended 1mm or so, but we'll see. It definitely works, though on my last print I had to cut the “indexing” tabs at the corner of the top cover off.
It prints beautifully on an A1 mini without support. If your print-bed is large enough, you should be able to print this to fit a full-size AES cartridge, although bear in mind that this is 50.25% scale, so it might need to be a tiny bit under 2x this size (though that should be fine too). I actually made a full-sized variant that is designed to be printed split so it can fit on an Ender3 or Bambu X1 bed, but I'll upload that later as a remix.