1 / 2
Prusa Core One XY Carriage Toothed Idler — zdjęcie 1
1 / 2

Prusa Core One XY Carriage Toothed Idler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

XY Carriage with toothed idlers for the Prusa Core One

Ocena
5 / 5
Polubienia
95
Pobrania
185
Wydruki
9
Wyświetlenia
2836
Oceny
7

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
GNU General Public License v2.0

In an attempt to reduce print artifacts, I'm wanted to try using a toothed idler with the Core One. I remixed the XY carriage to be able to accommodate the toothed idler which has a slightly thicker width

 

This takes 2x Gates 2GT toothed idlers (20T, 6mm belt, 3mm bore). The spacing is to accommodate an idler width of 10mm


Gates can be purchased here: https://www.filastruder.com/products/gates-2gt-idler?variant=41017736724551
There's a Mellow idler that also fits (select 20T with T): https://www.aliexpress.com/item/4000040551804.html


This should be printed in PCCF to match the original printed part