Creality Modern Hotend Shroud - Ender-3, Ender-3 Pro

A hotend shroud for stock creality printers using the MK8 hotend (OEM). "S" versions use m3 screws to secure the front to the base, while "M" versions use 6x3mm magnets. . Remixes encouraged.

NOTE: In addition to fitting over the duct, the part cooling fan need to be tipped slightly and will need a bit of hot glue on the top to hold it securely. It will still be relatively easily removable. We are working on a better solution.

VERSIONS: 

Note: All CR-Touch Versions work without a CR-Touch

MK3.3S = Bowden, No Magnets, Hotend Cooling Fan on Right side 

MK3.4S = Bowden, No Magnets, Hotend Cooling Fan on Left side 

MK3.4M = Bowden, Magnets, Hotend Cooling Fan on Left side 

MK3.4S_CR-Touch = Bowden, CR-Touch Mounting, No Magnets, Hotend Cooling Fan on Left side 

MK3.4M_CR-Touch = Bowden, CR-Touch Mounting, Magnets, Hotend Cooling Fan on Left side 

MK3.5S_SpriteSE_CR-Touch = Sprite SE Direct Drive Extruder, CR-Touch Mounting, No Magnets, Hotend Cooling Fan on Left side

MK3.6S_CrealityDirectDrive_CR-Touch = Creality Direct Drive Upgrade Kit Extruder, CR-Touch Mounting, No Magnets, Hotend Cooling Fan on Left side

COMPATIBLE MACHINES: 

Ender-3 V1 

Ender-3 Pro 

CR-10 Mini 

If you decide to test with a machine that is not listed here, please post in the comments whether it is compatible.

COMPATIBLE ABL PROBES: 

KlackEnder by KevinAkaSam 

CR-Touch/BL-Touch (Uses stock CR-Touch bracket)

COMPATIBLE EXTRUDERS: 

Bowden 

Sprite Extruder SE

Creality Direct Drive Upgrade (The one with stepper over hotend facing backward)

PRINT SETTINGS: 

Print in ABS or PETG recommended. Tested in ABS. 

Supports needed - NOT IN DUCTS 

<50% infill recommended 

You need 1 Front Cover & 1 Main Shroud. Front covers marked "M" are interchangeable with other front covers marked "M". Front covers marked "S" are interchangeable with other front covers marked "S" except for Mk3.6S.

HARDWARE NEEDED: 

"S" versions use m3 screws to secure the front to the base, while "M" versions use 6x3mm magnets. 

Magnetic Cover: 

4x 6x3mm magnets

1x 5015 Radial Fan

2x M2 nuts

2x M2x6mm machine screws (Can be longer)

Non-Magnetic Cover: 

Note: All versions except Mk3.3S Need one of the M3x8mm screws to be countersunk, and the others to be buttonhead or cap screws

4x M3x8mm machine screws 

4x M3 nuts

1x 5015 Radial Fan

2x M2 Nuts

2x M2x6mm machine screws (Can be longer)

Print Settings

Printer Brand:

Bambu Lab

Printer: 

Bambu X1C

Rafts:

Doesn't Matter

Supports: 

Yes, NOT IN DUCTS

Resolution:

Smaller resolution makes smoother cooling ducts.

Infill: 

<50%

Future Updates:

Instructions coming soon

Category: 3D Printer Parts