1 / 4
Canik Magazine Baseplate Retainer
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
I was looking for a replacement for my Canik TP9 pattern baseplate retainer but I wasn't able to find any, so I made this simple model. This retainer has a spring guide and a properly sized retainer peg for a solid baseplate lockup. I've tested this on my 10, 12, 15, and 18 round magazines. Very little risk of damage to this part since it's surrounded by the magazine body and covered by the baseplate.
Updated 5/5/2025 - I added small tabs on either side of the spring guide similar to the OEM retainer to avoid the part of slipping off of the end of the spring during installation.