1 / 3
Bag Strap End Clip (no supports; no stitching needed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bag strap end clip design to keep the strap from fraying at the ends.
- Ocena
- 0 / 5
- Polubienia
- 68
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 713
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (98)Powiązane
Use Case:
- If your bag strap originally had rubber or plastic strap ends but they already brittled and crumbled
- If you want to keep your bag strap from fraying at the ends (as an addition to melting the tips if it is Nylon strap, or as an addition to end stitching)
- If you want to add flair to your bag straps using different colors
- Bag Strap Measurements:
- Width: 25 mm and 18.6 mm
- Thickness: 1.4 mm to 1.8 mm
Printing Tips:
- Recommended material: PETG, PLA
- Brim Width: 3 mm
- Brim Separation Gap: 0 mm
- Print Bed Orientation: as shown below…
How to Use:
- Slide the “Lock” piece in.
- Slightly open the “Clip” piece and slide the tip of the bag strap into it.
- Slide the “Lock” piece back into the “Clip” piece to lock everything together.
The design almost but didn't fit exactly what you needed?
- Please comment below if you need a Custom width and thickness to match your strap specifications. I can generate and upload a new version for you.
Thank You!
If you like what I do and want to support my projects, it means a lot. Your support helps me keep making, fixing, and sharing the things I love—no pressure, just gratitude. Thanks for being here.
https://buymeacoffee.com/kraavs
