An Atari ST like case for Raspberry Pi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
60% scale Atari ST like case for Raspberry Pi, with a mechanical keyboard, SSD, audio and Midi interface and USB hub.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 192
- Wydruki
- 0
- Wyświetlenia
- 1379
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Since I started to play with Atari ST emulators, Aranym and Hatari, about 10 years ago, I always had the objective to build a computer booting an Atari system with the highest compatibility possible and with strong performances. The objective was partially achieved with BeeKey and BeePi, but still something was missing : the good old look and feel.
Recently, I have got a 3D printer. After a few months learning 3D design, 3D printing, testing and failing, I am glad to share this project. It has been originally designed for the Raspberry Pi 5, but can be adapted to the RPi 3 or 4.
The 3D source files, BOM, printing and assembly documentation and OS can found here : https://sites.google.com/site/beebox68k/atapi
Print Settings
- Printer: ELEGOO NEPTUNE 3 Plus
- Rafts: No
- Supports: Yes
- Resolution: 0,2 mm
- Infill: 15%
- Filament material: PETG
- Filament brand: Elegoo
- Filament color: black
The case is printed in PETG in order to withstand the RPi temperature. You can also print it in ABS but don't use PLA as it becomes weak at high temperature.
It is split into different parts which need a specific orientation to print properly. (see tuto link)
Partial supports are needed for some parts. Block the supports where they are not needed especialy under chamfers and filets. For aesthetic reasons, print with the front of each part in front and hide the seam in the back.