Star Wars Rathtars Revenge Pirate Cruiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the Pirate Flagship Rathtar's Revenge from Star Wars: Young Jedi Adventures
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 359
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution
The Rathtar's Revenge was a pirate flagship used by the Ganguls during the High Republic Era.
It appeared in Season 2 of Young Jedi Adventures.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| 185mm | 112mm | 56mm |
There are no official dimensions for this ship. The scale should be about 1:2,000.
The wings at the back can fold back using a print-in-place hinge. The file “rathtars revenege-test” contains just the wings so that you can test your print settings.
Print Instructions
Printed at 0.15mm layer height. Needs supports on buildplate.
The model is split in two parts:
- “rathtars revenege-body”
- “rathtars revenege-finns”
The finns are printed separately because supports would be very difficult.
If you are unconcerned about difficult supports, you can try printing “rathtars revenege-base”, which has everything in one model. But don't say I didn't warn you.
For Light and Life.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#