Simple handle for reciprocating saw blades MK1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1st iteration of a simple printable handle that fits standard saw blades. Not a heavy duty tool!
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 371
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
The handle consists of 2 printable parts: “HandleMainpart” and “HandlePresser”.
They join together with M3x10 bolt + 2 standard washers and a nut.
See the 3rd included part named “HandleSeat”. That is a small section of the handle intended as a test print for your printer setup. It should print a precise cutout for the saw blade to fit in. If it doesn't, you will need to modify the model or tweak the scale or other settings.
I measured the seat using Tactix brand saw and haven't checked the tolerances against other manufacturers saw blades.
I intended to use ASA filament for this and the “Presser” part and gripping end of the “Mainpart” should be printed with 100% infill. You can use modifiers to set less infill further away from the tip.
This isn't a heavy duty tool, not intended for serious applications. This is intended for small household tasks or hard to reach places etc that you would like to use this type of saw but can't access with the real tool.