Dumbell Disc Support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric customizable support rod for dumbell discs (and other objects)
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 116
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution
This model was created because I needed a way to store my corength dumbell discss. It allows generating supports with a variable diameter and height disc base and a center rod that can be either be part of the base or printed in threaded sections that can be combined to increase the center rod height as needed. Initially this was created as a support for dumbell discs but it can be used for other stuff (paper towels, cds ...).
I uploaded the openscad file but also stls of the bases and rods I used to print my supports. The openscad module requires the BOSL2 library.
The module is also available at https://github.com/danielandrei/OpenSCAD/tree/main/random/dumbbell_disc_support
The model offers the following customizable parameters:
| Name | Type | Description |
|---|---|---|
| type | text | object type to generate, Either a base or an extesion rod. The extension rods have internal threads on the bottom. Possible values: base. rod |
| top_cap | boolean | if true this will generate a cap instead of the threaded rod. This can be used both on a rod to generate a cap or directly on a base if a fixed height support is required |
| support_base_diameter | float | diameter of the support base |
| key_typesupport_base_height | float | height of the base (without the holder rod directly on the base) |
| support_rod_diameter | float | diameter of the support rod |
| support_height | float | height of the supporting rod of the section (excluding base height and the height of the thread at the top if the section is not a top cap) |
| thread_diameter | float | diameter of the threaded section |
| thread_height | float | height of the threaded section |
| thread_starts | int | number of thread starts. Higher number makes the sections quicker to add/remove but less resistant to vertical tension. |
| pitch | float | length between threads |
| clearance | float | clearance value to be applied to the interior threads. This is applied to the $slop parameter of the BOSL2 threaded_rod module |