3D Chameleon Auto Clippy For Neptune 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my Current Auto Clippy set up i have on my Neptune 4 Plus for my 3D Chameleon set up!
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 827
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my current AutoClippy modifications / designs to work on my Neptune 4 plus.
i have over 1000 filament changes using this system and it has been very reliable. if you wanted it to be more reliable i would recommend adding a filament sensor before the extruder gears. But since I'm stilling running stock Neptune OS i haven't added one.
the reason i did this instead of doing tip shaping is because i found with the stock Neptune 4 extruder set up, over 500 changes it would start filling up with little bits of plastic causing inconsistent filament changes.
with the AutoClippy all those issues are gone!
i have used PETG and i am currently using ABS printed parts.
For print settings i just used stock Voron settings, its probably a bit overkill but it seems to work well!
I also used auto tree supports. i will show photos of my current slicer settings so you can hopefully get the same results!
the STLs should open how i printed them, if not please match the photos I've uploaded.
if you have any questions please feel free to ask!
i am using this servo
https://www.amazon.ca/dp/B07SWW9NDR?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1
i am also using this DC Step Down Converter Voltage Regulator
https://www.amazon.ca/dp/B07XXSK68F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1
( I have not printed theses parts in awhile, so if somethings don't work please let me know! )
i hope everything works for you!