Sheet music clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clamp to hold your sheet music
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 59
- Wydruki
- 1
- Wyświetlenia
- 297
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Share Alike
My sheet music books always tend to close themselves on the music stand while I am playing, so I designed this clamp to keep them open.
The clamp sits on the rear board of the music stand with some felt pads to prevent damage to the board. For me, a 15mm wide clamp sits snugly on a 12.6 mm thick board, but that also depends on the felt. The model can be scaled a bit to fit different board thicknesses. I added a narrower version (4 mm) for thin (metal) boards, but have not actually tested or even printed that myself.
I recommend printing in PETG for some flexibility. I printed it with the default quality profile in PrusaSlicer at 0.2mm layer height. Mirror the model in the x- or y-direction to get the clamp for the right side.
If you print this model, I would love to see a make!