Recurve Bow Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This folding bow stand should fit most recurve bows. You will need to print five copies of the tripod pole file (three…
- Ocena
- 4,5 / 5
- Polubienia
- 37
- Pobrania
- 223
- Wydruki
- 2
- Wyświetlenia
- 2058
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This folding bow stand should fit most recurve bows. You will need to print five copies of the tripod pole file (three for the legs and two for the neck of the tripod). Print the rubber foot end file with flexible filament to prevent the tripod from sliding on smooth surfaces.
No glue is required to hold the tripod together except for the rubber foot ends.
Print Settings
Printer:
FlashForge Creator Pro
Rafts:
Yes
Yes
Resolution:
0.2 or higher
20% or higher
Notes:
I recommend printing each part with at least 20% hexagonal infill and three perimeters in order to make sure that the parts are strong enough to support the weight of a bow.
Category: 3D Printing