1 / 5
Impossible Fidget Spiral toy (FREE TO SELL) — zdjęcie 1
1 / 5

Impossible Fidget Spiral toy (FREE TO SELL)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Impossible Fidget Cone!

Ocena
5 / 5
Polubienia
44
Pobrania
871
Wydruki
3
Wyświetlenia
1799
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Impossible Fidget Cone!

 

There's 2 print profiles. One where both parts are on the same plate, and the other includes 1 part on each plate if you would like to use several colors or just want to print separately. The lower layer height, the less friction there will be when passing through. 0.08mm layer height is recommended

 

If you have adhesion issues, run full bed leveling and make sure to wash your bed with dish soap and warm water!

 

Feel free to upscale this. It can be downscaled too, but take caution as downscaling/upscaling will affect tolerances.

 

This is free to sell, enjoy!

Makerworld listing

Tagi