StealthStand - 2020 Extrustion Stand for Toolheads
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toolhead stand using 2020 extrusion, can even fit multiple!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 139
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for stealthburner and pretty much every toolhead that fits on an MGN12H. Could fit multiple too! c:
[CAD](https://cad.onshape.com/documents/48998b3fc800fcb4c17c9226/w/c14f7319e3e82146f085662a/e/95eb54be3cfae1ef96847024?renderMode=0&uiState=681799938c95cc1c4a4719d8)
________
There are 2 types: if you want to use the fake printed carriage, or if you have a spare MGN12H lying around.
The feet for the FakeCarriage are the same, print 2x of them. Just make sure the heatset hole is oriented correctly (the flat part should be on top).
The feet for the rail version are different, orient them so that the flat part of the heatset hole is facing upward.
For the FakeCarriage, you will need:
- 1x 2020 extrusion of your liking. I used a v-slot from the x axis of my ender, but normal Misumi ones should work too.
- 6x M3 heatsets. 4 for the printed carriage, and 2 for the feet.
- 2x ~12mm M3 screw for the feet. Mine stayed on tight without the screws, so this could be optional.
For the rail version, you will need:
- 1x 2020 extrusion of your liking. I used a v-slot from the x axis of my ender, but normal Misumi ones should work too.
- 2x M3 heatsets.
- 2x ~12mm M3 screws for the feet. Mine stayed on tight without the screws, so this could be optional.