Enforced Insert for Makita MLT100
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enforced table insert for Table Saw Makita MLT100 / MLT100X.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 156
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I am quite happy with my table saw MLT100 from Makita. Nevertheless, it is designed for cutting construction timber.
But I often use it for cutting firewood made from crooked branches. In the process, from time to time the branches bounce on the table. The original table insert (JM27000067) is too weak for this use case and quite easily gets broken:
After the 3rd table insert replacement I designed my own one as a more robust variant.
Printing
- Filament: ASA,ABS or similar (PLA not recommended!)
- Support: not needed
- Infill: 100% recommended
Due to the size the plate it needs a 350x350mm printer to print as one single part.
Assembly
The plate can be fixed with the existing screws.