Convertible Deck Box Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A two-in-one deck box (with a dice drawer) that cleanly converts into a dice tower after your deck is taken out.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designed for a Magic: The Gathering Commander deck that rolls a lot of dice, the interior card space is 2.75" x 3.25" x 3.75" (~70mm x ~82.5mm x ~95mm), which is half an inch larger than that of the Ultimate Guard Sidewinder 100+ deck box as a point of reference – that leaves room for a double-sleeved Commander deck alongside tokens/an Attraction deck/etc.
A video of the box being opened and turned into a tower can be found here: https://bsky.app/profile/tomrmarks.bsky.social/post/3loenu6nwm22g
A small disclaimer: This was made as a personal project, and while I am very happy with the functionality of the final design, I am relatively new to 3D printing overall. That means a little filing/sanding to get the tolerances right will likely be necessary, and the interior supports can be a bit obnoxious to remove. I very lightly sanded the interior bumps that lock the dice drawer in place first, and then sanded the slots that the slats go into – these should be inserted with the bumps facing down, and slowly dialing the width of those slots in will allow them to be removed easily with a pinch but still stay secure otherwise.