1 / 2
Qidi X-Smart 3 X-Plus 3 and X-Max 3 30mm hot end fan holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the fitting of a 30mm hot end fan replacing the poor and loud 25mm standard fan (This solved by hot end clogs)
- Ocena
- 1 / 5
- Polubienia
- 15
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 606
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (30)Powiązane
Fan mount the fitting of a 30mm hot end fan replacing the poor and loud 25mm standard fan (This solved by hot end clogs). Mounts using screws used to mount hot end.
Tested on X-Smart 3 but should work on other X-3 series printers.. Not tested.
