Stackable box, Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stackable boxes with semi-open front based on the Gridfinity system.
- Ocena
- 5 / 5
- Polubienia
- 44
- Pobrania
- 208
- Wydruki
- 1
- Wyświetlenia
- 689
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
There are quite a few stackable boxes with a semi-open front, I wanted to make a variant based on the Gridfinity system.
This Gridfinity box set is available in 1x2 (42x84), 2x2 (84x84mm) and 2x3 (84x126mm) modules and 3 different heights 6-8 units (40-54mm). Dimensions in file names are width x depth x height. Width and depth units are 42mm grid slots, height units are 7mm.
Printing and print settings
In the model files, the parts are orientated in the direction best suited for printing. Use e.g. PLA for printing with a layer height of 0.2mm or less and a nozzle width of 0.4mm. A wall, bottom and top thickness of at least 3 lines and an infill of 25%. There is no need for a support structure.
More of my models
You might be interested in some of my other models. Here you can find more of my models for the Gridfinity system.